Automotive Industry News & Information - The Wrench Automotive

At The Wrench in Greeley, CO, maintaining your fleet and keeping your business reliably on the road is our primary focus. As trucks wear out, and they always do, you will inevitably be faced with this dilemma - “Should I fix this truck, or replace it with a new one?” This isn’t always an easy question to answer. As your fleet specialists, our team here at The Wrench is here to help you decide.

In the diesel world, "blow-by" is a term you're bound to run across at some point if your line of work involves diesel-powered vehicles of any kind. What is blow-by, what causes it, and how concerned should you be? At The Wrench in Greeley, CO, our fleet maintenance and diesel technicians see it on a regular basis. Here we'll take a quick look at blow-by, correcting it, and preventing it.

What is Blow-By? - Diesel blow-by is a term that describes an event of lost compression into the crankcase. Blow-by occurs whenever a burnt or unburnt fuel and air mixture escape from the cylinder and past the piston rings and into the crankcase. In a perfect world, the piston would be sealed tightly in the cylinder, able to move up and down but keeping all the air and fuel and exhaust that enters or exits the cylinder during the combustion process out of the crankcase. As you'll see, this perfect world doesn't exist, but it is important to minimize the amount of blow-by in a diesel engine.

It’s easier than ever to keep your fleet running smoothly for thousands of miles. If a vehicle has less than 50,000 miles on it today, chances are it still has 75 percent of its driving life ahead of it. That’s good news if you’re a company managing a fleet of vehicles. It wasn’t that long ago that hitting the 100,000-mile mark on the odometer was a major milestone. Today, vehicles are built to last. With the proper maintenance and attention, there’s no reason you shouldn’t expect to see that 50,000-mile reading on the odometer one day roll right past 200,000 and keep ongoing. Here at The Wrench, we're going to give you some tips on how to make that happen!

Obviously, the dirtier your fuel system is, the bigger the improvement you will see in performance and fuel economy after a fuel system cleaning. But it is important not to wait until your system is running poorly. If you do, by the time you get a cleaning, you’ve wasted hundreds of dollars in gas or even possibly damaged your fuel injectors and catalytic converter.

Dirty Hands Working on a diesel truck engine

Keeping your fuel system maintained will prevent premature parts failure and poor running conditions. Here are some important aspects of diesel fuel system maintenance, to keep your fleet running smoothly. While your system and components should typically be serviced by a professional technician, there are some things you can be conscious of that will go a long way toward keeping your engine in good shape.

Your car’s fuel system works with the rest of the engine control system to deliver the best performance with the lowest emissions. Check your car’s fuel system regularly or immediately if you smell gas or suspect a problem.

What does it do? - The fuel system transfers fuel from the fuel tank and passes it through a fuel filter for straining before it arrives at the injectors. A pressure regulator controls fuel pressure to ensure good engine performance under a variety of speed and load conditions. Fuel injectors, when activated, spray a metered amount of fuel into the engine. Some vehicles use a return line system to return unused fuel back to the tank.

Diesel engines are known for their reliability - that’s probably at least partially why you bought one. However, like all things, diesels and their components wear out eventually. Fortunately, the technicians at The Wrench in Greeley, CO have you covered. Here are some fuel system issues to watch out for.

Part of maintaining your vehicle is keeping its safety devices in good working order, especially when there are kids in the vehicle. Seat belts, window locks, and airbag sensors work together to keep children safe in an automobile. Though safety components are generally very reliable, they do occasionally fail. The Wrench in Greeley, CO is here when they do; here are some things to watch out for.